>>>>> "Andrew" == Andrew Johnson <[email protected]> writes:
> I'm not aware of any EPICS drivers available for other VME-based CANbus
> interfaces, although I might be wrong.
Just for completeness:
BESSY is using the VME-2 and VME-4 CAN interface cards by esd (6U VME
boards with 2 resp. 4 independent CAN interfaces).
Our software package is implementing parts of the CANopen protocol, so
it is layered (device support, protocol stack, generic CAN driver, low
level card driver) and not a bare bone low level CAN device support.
More info:
esd (VME CAN cards) http://www.esd-electronics.com/
CANopen http://www.can-cia.de/canopen/
BESSY's drivers http://www-csr.bessy.de/control/SoftDist/MultiCAN/
Cheers,
Ralph
- References:
- GreenSpring TIP810 CANbus system wtw00992
- Re: GreenSpring TIP810 CANbus system Andrew Johnson
- Navigate by Date:
- Prev:
Re: GreenSpring TIP810 CANbus system Andrew Johnson
- Next:
RTEMSfor MVME5500 Kiman Ha
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: GreenSpring TIP810 CANbus system Andrew Johnson
- Next:
Re: GreenSpring TIP810 CANbus system John Maclean
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|