Hi Everyone;
I am using the IP-Octal 232 and VIPC616
carrier board, with drvAscii/drvSerial/tyGSOctal. There are four slots(A
,B ,C ,D ) in one VIPC616 and eight ports(a ,b ,c ,d ,e ,f ,g
,h ) in each IP-Octal 232. The communication is ok between IP-Octal 232
and other devices, when the IP-Octal 232 is put into slot A, or slot B ,or slot
C of VIPC616. When the IP-Octal 232 is put into slot D of
the VIPC616, The later ports(e ,f ,g ,h ) of the IP-Octal
232 doesn't work again, however,the first four ports(a ,b ,c ,d
) of IP-Octal 232 work well. I have exchange several
IP-Octal 232 and VIPC616 respectively, the same errors will occur
again.
Is anybody could do help me? any adivce ia
appreciated! Thanks in advance.
Li,Gang
Accelerator Control Group, Accelerator Research
Center Institute of High Energy Physics (IHEP) P.O. Box 918-10 Beijing,
100049 P.R. China
|