Experimental Physics and
Industrial Control System

There is motorRecord (http://www.aps.anl.gov/upd/people/sluiter/epics/motor/index.html)
support available for the NewFocus 8750. This is an EPICS 3.14 asyn driver so it can connect
thru a serial or TCP/IP ports. I have not tested this driver against the 8752 model
yet but I do have plans to do this soon.

--
Joseph Sullivan
[email protected] <> 630-252-8657
Advanced Photon Source
APS Engineering Support
Beamline Controls & Data Acquisition Group

Hi,

I was wondering if somebody has developed EPICS device support for a
NewFocus Picomotor Ethernet controller 8752? We would like to talk via
tcp/ip and this unit to 6 picomotors, which are attached to it. As an
alternative we could also use RS232 communications with the 8752.

Any help would be greatly appreciated.

Thanks and with kind regards,

Max

--
Maximilien J. COLLON

cosine Research BV :: Tel +31 71 528 49 69
Niels Bohrweg 11 :: Fax +31 71 528 49 63
NL-2333 CA Leiden :: Web http://cosine.nl

Replies:

AW: NewFocus 8752 Maximilien J. Collon

Navigate by Date:

Prev: Re: NewFocus 8752 Steve Shoaf

Next: RE: NewFocus 8752 Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: NewFocus 8752 Steve Shoaf

Next: AW: NewFocus 8752 Maximilien J. Collon

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  <2006>  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024