Re: Building a standalone IOC for an Intel embedded system

[David Kline <dkline@aps.anl.gov>]

hello john,

i'm not quite sure i can help, but i build epics iocs under vector linux 
and have for fedora core 3 as well. my processor
is a 660mhz pentium iii on a pc104 sold by diamond systems. what's sorts 
of issues are you having? generally it was
quite simple. i simply downloaded base and synapps from the website. 
also, i have written an asyn driver for the adc's
on diamond systems athena processor pc104 card. if this is any help, let 
me know and i can send you the sources.

please advise, thanks in advance,
/david


Jon Brinkmann wrote:
> All,
>
> I need to build a standalone IOC on an Intel (AMD Geode LX800) PC104 card
> from a Scientific Linux (= RedHat Enterprise) host.  Anyone have a "howto"?
>
> Jon
> ---
> Dr. Jon Brinkmann, Factotum			Apache Point Observatory
> Network and Systems Administrator		2001 Apache Point Road
> Instrument Scientist				P.O. Box 59
> E-mail:	brinkmann@nmsu.edu			Sunspot, NM 88349-0059
> URL:	http://www.apo.nmsu.edu/brinkmann/	Tel: 505-437-6822
>   


--

+-------------------------------------------------+
David M. Kline                   dkline@aps.anl.gov
Beamline Controls and Data Acquisition (BCDA)
Argonne National Laboratory, Advanced Photon Source
Argonne IL, 60439                      630.252.8639
  ---------------------------------------------
                  Beamlines R Us
+-------------------------------------------------+