I created the following EPICS R3.14 Makefile for adl2edl and was then
able to build
it as an extension on solaris-sparc, linux-x86, and darwin-ppc.
TOP = ../..
include $(TOP)/configure/CONFIG
PROD_HOST = adl2edl
adl2edl_SRCS = fonts.cc translator.cc graphic.cc control.cc monitor.cc
adl2edl_LIBS = Xm Xt X11
Xm_DIR=$(MOTIF_LIB)
Xt_DIR=$(X11_LIB)
X11_DIR=$(X11_LIB)
PROD_HOST += makeColorList
makeColorList_SRCS = makeColorList.cc
include $(TOP)/configure/RULES
Umashankar Panda wrote:
Dear Sirs,
I have two requiements for which I need your help. Kindly help me to do so.
1st:
How to convert medm files to edm files. I could not suceed in building
adl2edl source file. I have untarred it into the ../extensions/src
directory. Please guide me the procedure.
2nd:
I have some data coming out from a PLC as message through serial port
ttyS0 in my PC. It is in ASCII format with CR LF at the end of
message. The requirement is simply to read it and display it in the
message box in medm / edm. I need to build the ioc for this. Kindly
suggest how to proceed.
With regards
Umashankar Panda
VECC (India)
- References:
- adl2edl conversion and ascii input ioc Umashankar Panda
- Navigate by Date:
- Prev:
adl2edl conversion and ascii input ioc Umashankar Panda
- Next:
Re: Learning EDM John Sinclair
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
adl2edl conversion and ascii input ioc Umashankar Panda
- Next:
listen for time beacons Geoff Savage
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
<2007>
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|