RE: DeltaTau UMAC ethernet access?

["Rees, NP (Nick)" <nick.rees@diamond.ac.uk>]

Dirk,

Which Delta Tau UMAC drivers are you using? The driver on the GSECARS
site http://www.gmca.aps.anl.gov/TPMAC2/ was initially developed for a
UMAC ethernet interface. It is an interpose interface for AsynIPPort.

Nick Rees
Principal Software Engineer           Phone: +44 (0)1235-778430
Diamond Light Source                  Fax:   +44 (0)1235-446713 

> -----Original Message-----
> From: tech-talk-bounces@aps.anl.gov 
> [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Dirk Zimoch
> Sent: 09 December 2008 14:05
> To: tech-talk
> Subject: DeltaTau UMAC ethernet access?
> 
> Hi all,
> 
> Is there a driver for the DeltaTau UMAC ethernet interface?
> 
> I could only find drivers for VME based or PCI based PMAC 
> controllers but not 
> for controllers (Turbo PMAC 2 CPU) connected via ethernet or 
> USB. The protocol 
> seems to be the same as for other DeltaTau controller types, 
> only the data 
> transfer layer is different (uses UDP). A typical case for 
> asynOctet, I think.
> 
> Dirk
> 
> -- 
> Dr. Dirk Zimoch
> Paul Scherrer Institut, WBGB/006
> 5232 Villigen PSI, Switzerland
> Phone +41 56 310 5182
> 
<DIV><FONT size="1" color="gray">This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
</FONT></DIV> 
-- 
Scanned by iCritical.