Kate, I agree that the choice of a record is not a big issue.
But the transform record crashing under any circumstances is a
big issue to me, and I appreciate the notice. If you have
any more data about this, that might help me find the problem,
please spill.
Tim
Kate Feng wrote:
Rarback, Harvey wrote:
Kate et al,
Mark Rivers wrote:
Can you figure out why the transform record is causing the crash?
It is
widely used with no other problems that I know of.
You use vxWorks. We use RTEMS.
A generic record such as "dfanout" works very well for the purpose.
In fact, I do not think a custom record such as a "transform" record is
needed.
FWIW, we at SSRL use the transform record (v5.7) with RTEMS (v4.7.1)
and EPICS 3.14.8.2 and do not experience any crashes.
We never had any crash in the past either until the applications becomes
complicated. Again, this is just my courtesy gesture. The system works
very
well by using the EPICS record listed in the "Record Reference Manual"
that I do not see this as a big issue. It's your choice.
Kate
--Harvey Rarback
--
Tim Mooney ([email protected]) (630)252-5417
Beamline Controls & Data Acquisition Group
Advanced Photon Source, Argonne National Lab.
- References:
- stop all motors Kate Feng
- RE: stop all motors Mark Rivers
- Re: stop all motors Kate Feng
- RE: stop all motors Rarback, Harvey
- Re: stop all motors Kate Feng
- Navigate by Date:
- Prev:
Re: stop all motors Kate Feng
- Next:
RE: stop all motors Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: stop all motors Kate Feng
- Next:
RE: stop all motors Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
| 
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·