Hi Peter,
The "dbpf HAD:RPC:S1:M0:C9:ToTL 200" is putting 200 into
the VAL field of the AO record: "HAD:RPC:S1:M0:C9:ToTL"
rather than the RVAL field. Thus, the RVAL field remains at 0.0.
The OUT link from the AO record gets processed as a result of
writing to the AO record:
field(OUT, "HAD:RPC:S1:M0:C9:stToTL")
This link causes the "200" to be placed in the VAL field of
the sub record: "HAD:RPC:S1:M0:C9:stToTL".
The sub record INPD field is looking at the RVAL field of
the AO field which is still at 0.0.
Cheers,
Andy
On Mon, 13 Jul 2009, Dr. Peter Zumbruch wrote:
> Hi all,
> I have the following problem (EPICS 3.14.10 / Debian 4.0)
> with this tiny database (minimized to my problem) .
> Why don't I see the Value/Raw Value of "HAD:RPC:S1:M0:C9:ToTL" at the
> input D of the sub record "HAD:RPC:S1:M0:C9:stToTL", which I try to
> access at c-code.
>
> 1) The ingredients:
> > record(ao, HAD:RPC:S1:M0:C9:ToTL) {
> > field(DESC, "0 0 0 2")
> > field(DTYP, "Raw Soft Channel")
> > field(FLNK, "HAD:RPC:S1:M0:C9:stToTL")
> > field(OUT, "HAD:RPC:S1:M0:C9:stToTL")
> > field(EOFF, "0")
> > field(LOPR, "0")
> > field(HOPR, "199")
> > field(DRVH, "250")
> > field(DRVL, "0")
> > field(LINR, "LINEAR")
> > field(OMSL, "supervisory")
> > }
> >
> > record(sub, HAD:RPC:S1:M0:C9:stToTL) {
> > field(DESC, "store 0 0 0 2")
> > field(INAM, "mySubInit")
> > field(SNAM, "myStoreFcn")
> > field(INPA, "0")
> > field(INPB, "0")
> > field(INPC, "2")
> > field(INPD, "HAD:RPC:S1:M0:C9:ToTL.RVAL")
> > field(INPE, "0")
> > }
> The referenced C-Code:
> > static long myStoreFcn(subRecord *precord)
> > {
> > ...
> > short thr;
> > ...
> > thr = precord->d;
> > ...
> >
> > printf( "Record %s called myStoreFcn(%p), thr %d, precord->d %f\n",
> > precord->name, (void*) precord, thr, precord->d);
> > ...
> > return(0);
> > }
> > ...
> > epicsRegisterFunction(myStoreFcn);
> > ...
> 2.) The test: (caput / dbpf)
>
> > epics> dbgf HAD:RPC:S1:M0:C9:ToTL
> > DBR_DOUBLE: 0
> >
> > epics> dbpf HAD:RPC:S1:M0:C9:ToTL 200
> > Record HAD:RPC:S1:M0:C9:stToTL called myStoreFcn(0x80577b0), thr 0,
> > precord->d 0.000000
> > DBR_DOUBLE: 200
> >
> > epics>dbpr HAD:RPC:S1:M0:C9:stToTL
> > A: 0 ASG: B: 0 C: 2
> > D: 0 DESC: store 0 0 0 2 DISA: 0 DISP: 0
> > DISV: 1 E: 0 F: 0 G: 0
> > H: 0 I: 0 J: 0 K: 0
> > L: 0 NAME: HAD:RPC:S1:M0:C9:stToTL SEVR: NO_ALARM
> > STAT: NO_ALARM TPRO: 0 VAL: 200
> 3. ) The (stupid) question: Why don't I get the value of
> HAD:RPC:S1:M0:C9:ToTL at D? At VAL I see it.
>
> Thanks for any explanation.
>
> Peter
>
> --
> Dr. rer. nat. Peter W. Zumbruch
> EE - department / Controls group / GSI
> E-Mail: P.Zumbruch_at_gsi.de
> Tel: +49-(6159)-71-1435 / Fax: +49-(6159)-71-2986
>
> GSI Helmholtzzentrum für Schwerionenforschung GmbH
> Planckstraße 1 / D-64291 Darmstadt / www.gsi.de
>
> Gesellschaft mit beschränkter Haftung
> Sitz der Gesellschaft: Darmstadt
> Handelsregister: Amtsgericht Darmstadt, HRB 1528
>
> Geschäftsführung: Professor Dr. Horst Stöcker, Christiane Neumann
> Vorsitzende des Aufsichtsrates: Dr. Beatrix Vierkorn-Rudolph,
> Stellvertreter: Ministerialdirigent Dr. Rolf Bernhardt
>
>
>
- Replies:
- RE: sub routine record doesn't get value via INPD Allison, Stephanie
- References:
- sub routine record doesn't get value via INPD Dr. Peter Zumbruch
- Navigate by Date:
- Prev:
Re: sub routine record doesn't get value via INPD Maren Purves
- Next:
RE: sub routine record doesn't get value via INPD Allison, Stephanie
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: sub routine record doesn't get value via INPD Maren Purves
- Next:
RE: sub routine record doesn't get value via INPD Allison, Stephanie
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|