Re: Remote I/O

[Ralph Lange <Ralph.Lange@bessy.de>]

On Wed 16 Dec 2009 8:16:17 Matthias Clausen wrote:
> Hi Nick,
>
> [...] In our case sensors and actors are directly connected to 
> Profibus. The remaining I/O is connected through WaGo I/O with a 
> Profibus controller. Profibus driver and configuration is available 
> from us - even with redundancy support... 
Hi Matthias,

is that using the 1996 IPAC-Profibus Interface that is listed in the 
hardware support database on the EPICS web site?
Ralph