> Hi Wes,
>
> On Wednesday 20 January 2010 11:18:02 Wesley Moore wrote:
>> The other cards like this on other IOCs have always been set to 0x0000
>> (the jumpers match that also). The card did initialize yesterday after
>> I seemingly did nothing different. I think I've screwed up something to
>> do with ipac but it all seems fine. That's why I'm confused.
>
> This is starting to feel like it might be a hardware failure. If you can,
> try
> swapping the VIPC616, the Octal-232, the VME CPU board and/or the VME
> chassis
> with ones from a working system to see if any of them is dead.
>
> - Andrew
I've tried a different VIPC616 and Octal-232 to no avail.
- Replies:
- Re: Ipac with VIPC616 Andrew Johnson
- References:
- Ipac with VIPC616 wmoore
- RE: Ipac with VIPC616 Mark Rivers
- Re: Ipac with VIPC616 Wesley Moore
- Re: Ipac with VIPC616 Andrew Johnson
- Navigate by Date:
- Prev:
Re: Ipac with VIPC616 Andrew Johnson
- Next:
Re: Ipac with VIPC616 Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Ipac with VIPC616 Andrew Johnson
- Next:
Re: Ipac with VIPC616 Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|