Hi Huili,
From the printout it looks like you might have loaded two IOCs at the
same time. If you can check the generic start-up st.cmd file (maybe
under the localhome folder for example) , you might find two entries
there. If there are more than one, commenting out one will solve the
problem.
Best regards,
Jim
Hytec Electronics Ltd
Quoting huili <[email protected]>:
My ioc download message about Hy8002 as this:
IPAC3 = ipacAddHy8002("9,2")
filename="../../../src/libCom/osi/devLib.c" line number=373
Specified device address overlaps another device VME A16 0X00004C00 -
OX00004C9F Requested by drvHy8002filename="../../../src/libCom/osi/devLib.c"
line number=399
This device already owns the address range VME A16 0X00004C00 -
0X00004C9F Owned by drvHy8002ipacAddCarrier: Hytec VICB8002 driver returned
an error.
IPAC3 = 0x1e3ee420: value = 39321603 = 0x2580003
I don't know how to so ,Please give me a soluton!
Best wishes!
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
- Replies:
- Re: carrier card Hy8002 error jim . chen
- References:
- carrier card Hy8002 error huili
- Navigate by Date:
- Prev:
Re: What will "ACKT=NO" do? Andrew Johnson
- Next:
Re: carrier card Hy8002 error jim . chen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
carrier card Hy8002 error huili
- Next:
Re: carrier card Hy8002 error jim . chen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|