Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019 
<== Date ==> <== Thread ==>

Subject: how to start matlab script in MEDM
From: "Heiniger Martin" <Martin.Heiniger@psi.ch>
To: <tech-talk@aps.anl.gov>
Date: Wed, 13 Jun 2012 17:01:25 +0200
Hello all,

Is there a easy and safe way to start a not-compiled matlab .m script
via a button in MEDM?

We tried several things, but nothing was successful and safe (The worst
was blocking our server and generating GB's of log files).

I thank you, if you can give me any hints.

Best regards,
Martin


=========================================
Paul Scherrer Institut (PSI)
Martin Heiniger
Dipl. Informationstechniker HF
WBGB/002
CH-5232 Villigen PSI
SWITZERLAND

Telefon: +41 56 310 54 89
E-Mail: martin.heiniger@psi.ch
Internet: www.psi.ch
=========================================
 
 


Navigate by Date:
Prev: RE: thermocouple solutions Dalesio, Leo
Next: Re: EPICS build on armv6l Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019 
Navigate by Thread:
Prev: review the 2nd Public Working Draft of the pvAccess protocol specification Dalesio, Leo
Next: streamdevice: error handling for multiple lines of input from one command Rock, Judith E.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·