There are also one-wire serial strings. They do not do well in a rediation environment - but they are cheap. We are distributing them around our equipment.
From: firstname.lastname@example.org [email@example.com] on behalf of Dudley, David [firstname.lastname@example.org]
Sent: Wednesday, June 13, 2012 9:20 AM
To: EPICS Tech Talk
Subject: Re: thermocouple solutions
Depending you how dispursed the TC's are, you might consider something
like the AdvanTech ADAM 4000 or 5000 series modules.
The ADAM4011 is a single channel device that communicates over RS485, and
the ADAM 5000 family includes small, chassis based Ethernet or serially
connected modules that can handle single - 7 channel devices.
Take a look at
Small, lightweight devices that don't require much support to do their job.
On 6/12/12 6:06 PM, "Szalata, Zenon M." <email@example.com> wrote:
>We use Beckhoff Ethernet devices. KL3314 is a 4 channel TC device.
>A complete unit would consist of one BK9000 (Ethernet coupler), one
>KL3314, and one KL9010.
>These are rather inexpensive.
>> -----Original Message-----
>> From: firstname.lastname@example.org
>> On Behalf Of Wesley Moore
>> Sent: Tuesday, June 12, 2012 1:35 PM
>> To: EPICS Techtalk
>> Subject: thermocouple solutions
>> There's some old (from 2000) tech-talk posts asking about
>> readout hardware. Anyone have a solution for TCs that's not a PLC
>> would prefer something like 8 channels over serial or Ethernet. We
>> a few TCs, and they tend to be scattered around. Seen some products
>> to be usb only.
- RE: thermocouple solutions PELLE Sébastien
- RE: thermocouple solutions Szalata, Zenon M.
- Re: thermocouple solutions Dudley, David
- Navigate by Date:
review the 2nd Public Working Draft of the pvAccess protocol specification Dalesio, Leo
how to start matlab script in MEDM Heiniger Martin
- Navigate by Thread:
Re: thermocouple solutions Dudley, David
RE: thermocouple solutions PELLE Sébastien