Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019 
<== Date ==> <== Thread ==>

Subject: RE: Unable to get a picture from Baumer TXG13 GigE camera
From: <tom.cobb@diamond.ac.uk>
To: <urs.geissbuehler@space.unibe.ch>, <tech-talk@aps.anl.gov>
Date: Fri, 26 Apr 2013 14:27:29 +0000
Hi,

If the ArrayCounter is increasing, then aravisGigE should be producing frames. It could be that your NDStdArrays plugin is disabled? I'm also not sure which PV you mean when you say "FrameCounter".

The attached screenshot is of a working camera. Could you send me screenshots of the camera and NDStdArrays screens please?

Thanks,
Tom Cobb


> -----Original Message-----
> From: urs.geissbuehler@space.unibe.ch
> [mailto:urs.geissbuehler@space.unibe.ch]
> Sent: 26 April 2013 15:18
> To: tech-talk@aps.anl.gov
> Cc: Cobb, Tom (DLSLtd,RAL,DIA)
> Subject: Unable to get a picture from Baumer TXG13 GigE camera
> 
> Hi all,
> 
> We're trying to set up a  Baumer TXG13 monochrome CCD camera using
> aravisGigE. EPICS connects successfully with the camera and we can read
> and set the parameters. When setting AcquisitionStart=1 the
> ArrayCounter starts increasing (but not the FrameCounter). With tcpdump
> we see also the image data is transmitted and we also see higher or
> lower values with or without lens cover and also increasing numbers
> with the test image enabled. Unfortunately we never where able to
> retrieve the image data from NDArray, ArrayData always delivers an
> array filled with 0s. We are not sure now if the problem is related
> with the camera configuration or with NDArray. Is it normal that the
> FrameCounter remains 0? In case the camera is properly configured, we
> will be missing some configuration of NDArray. We tried
> EnableCallbacks=1 and also tried setting the array dimensions according
> to the resolution 1392x1040, Mono8. We might be missing something very
> basic, any suggestions and example configurations are warmly welcome.
> 
> Regards,
> Urs
> 
> _____________________________________
> University of Bern
> Institute of Physics
> Space Research and Planetary Sciences
> 
> Urs Geissbühler
> 
> Sidlerstrasse 5
> CH-3012 Bern
> Direct +41 (0)31 631 4425
> Main +41 (0)31 631 4411
> Fax +41 (0)31 631 4405
> urs.geissbuehler@space.unibe.ch
> http://space.unibe.ch/
> 
> 




-- 

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.

Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 

Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.

Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom

 







Attachment: camera.png
Description: camera.png


References:
Unable to get a picture from Baumer TXG13 GigE camera urs.geissbuehler

Navigate by Date:
Prev: Unable to get a picture from Baumer TXG13 GigE camera urs.geissbuehler
Next: RE: Unable to get a picture from Baumer TXG13 GigE camera Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019 
Navigate by Thread:
Prev: Unable to get a picture from Baumer TXG13 GigE camera urs.geissbuehler
Next: RE: Unable to get a picture from Baumer TXG13 GigE camera Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019 
ANJ, 20 Apr 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·