On Wed, 14 Aug 2013, Arnold, Ned D. wrote:
Has anyone implemented a cost effective solution for monitoring large
quantities (~96) of thermal diodes for cryogenic temperature monitoring
(down to 2K)? The solution proposed here is either the Lakeshore Model 218
or Model 224, both of which are ~$250/channel ... I was hoping to find
something cheaper.
The SNS uses Highland Technology V460 for monitoring silicon diodes on the
superconducting linac (2K) . . .
http://www.highlandtechnology.com/DSS/V460DS.shtml
Whether this would be cheaper then the lakeshore depends on if you already
have the VME crate.
--
Steven Hartman
[email protected]
- References:
- High density thermal diode monitoring Arnold, Ned D.
- Navigate by Date:
- Prev:
Re: Accessing Raspberry Pi GPIO through EPICS Peter Linardakis
- Next:
Displaying Linux PID's or pthread opaque pthread_t? nick.rees
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: High density thermal diode monitoring Pete Jemian
- Next:
Re: High density thermal diode monitoring Wesley Moore
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|