Re: read status nin "" 0 error with

[Ana Malagon <atmalagon@gmail.com>]

Success!

Embarrassingly enough, I had forgotten to include stdlib.h, so every GET function which involved a conversion function with atof was returning 0...

Thanks Eric, Mark for the help! Just to wrap up - as far as I can tell, changing -1 to 19 in TraceMask and TraceIOMask gives the same behavior as moving TraceMask/TraceIOMask below iocInit, so both ways work. 

On Wed, Dec 10, 2014 at 2:20 PM, Eric Norum <wenorum@lbl.gov> wrote:

O.K.  then the asynSetTraceIOMask should be moved down below the iocInit too.

I’ve clearly forgotten how much fun it is to work with multi-addressed devices….

On Dec 10, 2014, at 2:18 PM, Mark Rivers <rivers@cars.uchicago.edu> wrote:

> Would changing the -1 to 19 in the existing commands in the existing location work, too?

 

I would suspect not, because that device would not exist at that time.  But perhaps doing so creates the device?

 

Ana said changing -1 to 19 worked, but was that with the command before iocInit or after iocInit?

-- 
Eric Norum
wenorum@lbl.gov