Re: Using devIocStats under dynamic epics build.

[Alireza Panna <apanna1236@gmail.com>]

Hi Mark and Stephanie,

Yes deviocstats-R3-1-14 does create the dll file under dynamic build. The 3-1-7 module did not for some reason. 

When I do run the app by loading the deviocstats record, I get the following errors :

Can't set "XXX:ST_SCRIPT.DTYP" to "IOC stats"

Error at or before ")" in file "db/iocAdminSoft.db" line 269

Can't set "XXX:EPICS_VERSION.DTYP" to "IOC stats"

Error at or before ")" in file "db/iocAdminSoft.db" line 292

Can't set "XXX:APP_DIR.DTYP" to "IOC stats"

Error at or before ")" in file "db/iocAdminSoft.db" line 322

Besides that all the other records work as expected. Any ideas on how to fix these errors?

Thanks for the help.

Best

Ali

--

Alireza Panna

University of Maryland, College Park

On Wed, Jun 3, 2015 at 6:29 PM, Mark Rivers <rivers@cars.uchicago.edu> wrote:

Hi Alireza,

 

I am using the latest devIocStats from github, 3-1-14.  I have not had any problems building applications with static or dynamic builds on Windows.

 

Ø  I am assuming the issue is that I did not compile epics and synapps support statically in the windows OS

 

You should be able to build either statically or dynamically.  In fact you can do both at the same time by using different EPICS_HOST_ARCH values.

 

I am using EPICS 3.14.12.5 and building for the following architectures that are supported in that version of base:

 

win32-x86

win32-x86-static

win32-x86-debug

windows-x64

windows-x64-static

windows-x64-debug

 

I have built many applications that use both streamDevice and devIocStats on all of these architectures with no problems.

 

Mark

 

 

 

 

From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Alireza Panna
Sent: Wednesday, June 03, 2015 5:16 PM
To: tech-talk@aps.anl.gov
Subject: Using devIocStats under dynamic epics build.

 

Hello tech-talkers,

 

When compiling a stream based app that uses deviocstat support, I encounter the following error:  

 

No rule to make target `../../../lib/windows-x64/devIocStats.lib'

 

base (3.14.12.4) is compiled as dynamic for the windows-x64 arch. 

 

When compiling the same app under linux-x64 everything works fine. I am assuming the issue is that I did not compile epics and synapps support statically in the windows OS. If that is the issue then how do I use deviocstats successfully for dynamic builds. I am using devIocStats-3-1-7 currently.  

 

Any help/suggestions is much appreciated. 

 

--

Alireza Panna

University of Maryland, College Park