Experimental Physics and
Industrial Control System

Hi Jihwa,
 > Dose any one has experience of mrfioc2 evr driver for uTCA platform?
> PMC-EVR-230 firmware version: PMC-EVR-230-11000007.bit
I guess you are not using the native uTCA card but a PMC EVR on a PMC 
carrier card, right?

> mrmEvrSetupPCI("PMCEVR",0xe,1,0)
> Device PMCEVR 14:1.0
> Using IRQ 16
> Failed to open uio device for PCI device 0000:0e:01.0: No such file or
> directory
> Failed to enable interrupt
What does "lspci" say? Maybe you've plugged the card into a different 
AMC slot?

-Martin

-- 
Martin Konrad
Control System Engineer
Facility for Rare Isotope Beams
Michigan State University
640 South Shaw Lane
East Lansing, MI 48824-1321, USA
Tel. 517-908-7253
Email: [email protected]

Replies:

RE: mrfioc2 error at uTCA platform 김지화(빔라인장치팀)

Navigate by Date:

Prev: mrfioc2 error at uTCA platform 김지화(빔라인장치팀)

Next: RE: EpicsQt compile problems Andrew Rhyder

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: mrfioc2 error at uTCA platform 김지화(빔라인장치팀)

Next: RE: mrfioc2 error at uTCA platform 김지화(빔라인장치팀)

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024