RE: Long string command to device

[<michael.abbott@diamond.ac.uk>]

From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-
> Thanks for the fast answer.
> Then the problem must be of a different kind (I am rather new to EPICS).
> 
> I have the following database records:
> 
> record(waveform, "$(P):RAW2") {
>    field(DTYP, "stream")
>    field(OUT, "@Huginn.proto setRAW $(PORT) $(ADDR)")
>    field(FTVL, "CHAR")
>    field(DESC, "RAW waveform lakeshore record")
>    field(SCAN, "Passive")
> }

The problem is simply that, quite confusingly, the control field in a waveform record is called INP, even if the device support is treating it as an out record.  Change OUT to INP and it might work

-- 
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom