Re: Switched PDUs with EPICS support

[Bruce Hill <bhill@slac.stanford.edu>]

Hi Ziga,

We're using snmp to control PDU's from Leviton, iBootBar, and Sentry via EPICS.

Source code available here:

http://www.slac.stanford.edu/~bhill/epics-pcds/ioc-R3.14.12/common/Leviton/Leviton-R1.28.2.tar.gz

http://www.slac.stanford.edu/~bhill/epics-pcds/modules-R3.14.12/snmp/snmp-R1.1.0-2.7.0.tar.gz

Cheers,
- Bruce

On 05/10/2017 12:06 AM, gennaro.tortone@na.infn.it wrote:
> Hi,
> few months ago I developed an EPICS IOC for ATEN PDU
> (PE8208 - metered and switched) using SNMP device support
> module (https://groups.nscl.msu.edu/controls/files/devSnmp.html);
>
> source code available here:
>
>     https://github.com/gtortone/ATEN-EPICS
>
> Regards,
> Gennaro
>
>
> On Tue, 9 May 2017, Žiga Oven wrote:
>
> > Hi All,
> >
> > We are looking for alternative to APC switched PDUs as we would like to have cord longer than standard APC length of 
> > 12 feet.
> > http://www.apc.com/shop/us/en/products/Rack-PDU-Switched-1U-15A-100-120V-8-5-15/P-AP7900B
> >
> > I have checked the EPICS modules page and I have found several other options with existing support, but they all look 
> > a bit outdated (based on part numbers on the page and cross-referencing them with current vendor part numbers).
> > Are there other switched PDUs with EPICS support in use besides APC?
> >
> > Thanks,
> >
> > Žiga
--
Bruce Hill
Member Technical Staff
SLAC National Accelerator Lab
2575 Sand Hill Road M/S 10
Menlo Park, CA  94025