Re: ca CLI tool display problem

[Michael Davidsaver <mdavidsaver@gmail.com>]

On 07/14/2017 06:34 PM, Shen, Guobao wrote:
> That works.
> $ caget -F '|' V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I
> V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I|-1.75394
> $ caget -F ' ' V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I
> V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I -1.75394
> $ caget -F '$' V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I
> V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I$-1.75394
> $ caget -F '$$$' V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I
> V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I$-1.75394
> 
> I am not sure whether I like to have that.
> Is there any specific reason to introduce it?

You shouldn't have to.  The default should be the same as:

> caget -F ' ' V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I

Can you try this just to be certain?

I'm wondering if this might be something to do with your terminal font.