Hi Lin,
Michael might have the answers for all your questions.
It would be a valuable test if you can compile and run it in your environment since you are evaluating it for your next project.
Thanks,
Guobao
On 10/16/17, 5:46 AM, "[email protected] on behalf of Wang, Lin" <[email protected] on behalf of [email protected]> wrote:
Hello Michael,
I have two questions about this new release.
1. Does it support (fully, partly or not) the MRF VME-EVM-300 and VME-EVR-300 (which are not in the supported hardware list yet)? If not, is there any fork of mrfioc2 that can support them?
2. Is it already perfectly compatible with VxWorks (say VxWorks 6.8)? I remember it was not fully tested or guaranteed to work properly on VxWorks a couple of years ago.
I ask because my colleagues planned to build a timing system prototype using the MRF VME-EVM-300 and VME-EVR-300 for our HEPS (High Energy Photon Source) project. We are now evaluating the operating system and the EPICS driver for it, and VxWorks is still our preference.
Any suggestion is appreciated.
Thanks,
Lin
> -----Original Messages-----
> From: "Michael Davidsaver" <[email protected]>
> Sent Time: 2017-10-09 18:22:54 (Monday)
> To: "EPICS Tech-Talk" <[email protected]>
> Cc:
> Subject: mrfioc2 release 2.2.0
>
> Version 2.2.0 of the mrfioc2 driver for MRF timing cards is now available.
>
> This release adds support for newer 300 series PCI devices. Some
> incompatible changes have been made since the previous 2.1.0 release.
> The minimum required versions of Base and devlib2 have been updated.
> See the supported hardware list and change log for details.
>
> http://epics.sourceforge.net/mrfioc2/
>
- Replies:
- Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Pietryla, Anthony F.
- References:
- mrfioc2 release 2.2.0 Michael Davidsaver
- Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Wang, Lin
- Navigate by Date:
- Prev:
Re: EPICS training information Jiro Fujita
- Next:
Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Pietryla, Anthony F.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Wang, Lin
- Next:
Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Pietryla, Anthony F.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
|