Dear all,
while updating our IOC from EPICS 3.14.12.6 to 3.16.1 I discovered a
problem with the event record.
I use several binary output records, which listen to event number 2. If
the corresponding event record is processed, the binary output records
do no process. If I force them to with "dbpf <PV-NAME>.PROC 0", it works.
The IOC is running on a PowerPC.
I use
field(SCAN, "Event")
field(EVNT, "2")
in the bo record.
Have there been changes in the event record or shall I use a different
way to trigger these output PVs?
Best regards,
Simon
--
Simon Reiter
II. Physikalisches Institut
Justus-Liebig-Universtität
Heinrich-Buff-Ring 16
D-35392 Giessen
Tel: +49 641 99 33250
- Replies:
- pvPut error message by Sequencer Simon Reiter
- Re: Scanning on event number fails with EPICS 3.16 Benjamin Franksen
- Re: Scanning on event number fails with EPICS 3.16 Ralph Lange
- Navigate by Date:
- Prev:
RE: Using EPICS PV Gateway with multiple IOCs on the same server Abdalla Ahmad
- Next:
pvPut error message by Sequencer Simon Reiter
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Using EPICS PV Gateway with multiple IOCs on the same server Abdalla Ahmad
- Next:
pvPut error message by Sequencer Simon Reiter
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
|