EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: driver support for Gamma Vacuum QPC 4
From: "Martin L. Smith" <[email protected]>
To: "[email protected]" <[email protected]>, "[email protected]" <[email protected]>
Date: Tue, 10 Apr 2018 06:03:31 -0500
Here is a copy of what I have so far ... please let me know if I left
anything out that prevents you from compiling.

Thanks,
Marty


On 04/10/2018 06:00 AM, [email protected] wrote:
Marty,
If you're able to tar up what you have, that would be really useful. I'll be able to unpick the bits I need and then feedback our contributions to you and the EPICS community, if that works for you.

Mauro - do you have any comments or suggestions?

Regards,
Ian
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Martin L. Smith
Sent: 10 April 2018 11:49
To: [email protected]
Subject: Re: driver support for Gamma Vacuum QPC 4

At APS I have one QPCe running in production now and the EPICS driver mostly works ... at least I have readbacks. There are very few issues that I have not had the time to work on or test just yet.

All readbacks work but I have not been able to test the setpoint readback and settings yet or the high voltage on/off. It has been difficult for me to get my hands on one of these and even more difficult to get a ion pump connected to a test unit for reasons out of my control.

I was going to have it included in the synApps vacApp so that the driver would work with all other ion pumps as well. I would be happy to send the code to anyone that would like to try it out.

Marty

On 04/10/2018 05:01 AM, Jack wrote:
Does anyone use Gamma Vacuum QPC 4 vacuum pump controller ?
Thank you
--
    Mauro Giacchini

--
	
Mauro Giacchini
Control System Specialist ISTITUTO NAZIONALE DI FISICA NUCLEARE
p/f: 0039.049.80.68.558 a: Viale universita' 2, 35020 Legnaro, PD
-ITALY-
e: [email protected] <mailto:[email protected]> s:
yakman000



--------------------------------------------------------------------------------
Avast logo <https://www.avast.com/antivirus> 	

Questa e-mail è stata controllata per individuare virus con Avast antivirus.
www.avast.com <https://www.avast.com/antivirus>


<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>


Attachment: vac.tar.gz
Description: application/gzip


References:
driver support for Gamma Vacuum QPC 4 Jack
Re: driver support for Gamma Vacuum QPC 4 Martin L. Smith
RE: driver support for Gamma Vacuum QPC 4 [email protected]

Navigate by Date:
Prev: RE: driver support for Gamma Vacuum QPC 4 [email protected]
Next: Re: GpibBoardDriverConfig not found Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: driver support for Gamma Vacuum QPC 4 [email protected]
Next: Re: driver support for Gamma Vacuum QPC 4 Phillip Sorensen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019  2020  2021  2022  2023  2024 
ANJ, 10 Apr 2018 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·