RE: Query about control system choices for insertion devices

["ronaldo.mercado--- via Tech-talk" <tech-talk@aps.anl.gov>]

Dear Dirk,

Thank you your reply and for sharing this information.

Best wishes,
Ronaldo

> -----Original Message-----
> From: Dirk Zimoch <dirk.zimoch@psi.ch>
> Sent: 05 April 2019 09:53
> To: tech-talk@aps.anl.gov; Mercado, Ronaldo (DLSLtd,RAL,LSCI)
> <ronaldo.mercado@diamond.ac.uk>
> Subject: Re: Query about control system choices for insertion devices
> 
> Dear Ronaldo
> 
> This is the situation in SLS:
> 
> > Query about control system choices for insertion devices.
> >
> > Dear Sir/Madam,
> >
> > Would you be able to comment or let me know your choices in motion
> > equipment in your installations?
> >
> > Resolution
> 0.5 micron or 0.1 micron for gap
> 0.5 micron for phase
> 
> >
> > Motor type (stepper vs servo vs other)
> 4x servo each for 3 APPLE-II IDs
> 4x servo for 1 APPLE-X ID
> 1x servo for 1 planar cryo ID
> 1x stepper each for 6 planar IDs
> 
> >
> > Motor controller (make, model, type)
> 9x OMS VME58
> 1x Schneider Electric Lexium LMC20A1307
> 
> >
> > Amplifiers (make, model, type)
> 1x Beckhoff AX5203 (integrated controller) 4x Berger Lahr TLD 011 NF 1x Berger
> Lahr TLD 012 NF 16x Berger Lahr TLD 132 NF (servo for 4 APPLE IDs) 1x Schneider
> Electric Lexium 05 (servo for cryo ID)
> 
> Best regards,
> Dirk

-- 
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom