Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <2019 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <2019
<== Date ==> <== Thread ==>

Subject: Should drvAsynIPPortConfigure print an error when device is not connected?
From: "Paduan Donadio, Marcio via Tech-talk" <tech-talk@aps.anl.gov>
To: "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Wed, 15 May 2019 00:55:48 +0000

Hello, all.

 

When calling drvAsynIPPortConfigure on the IOC, shell passing an IP of a disconnected device, no message is print on the IOC shell. Is there a way to configure it?

 

Thank you,

 

Márcio




Márcio Paduan Donadio | Control Systems Engineer

Advanced Control Systems Department

SLAC National Accelerator Laboratory | Menlo Park, CA

p: 650.926.5007 | w: slac.stanford.edu


Replies:
RE: Should drvAsynIPPortConfigure print an error when device is not connected? Abdalla Ahmad via Tech-talk

Navigate by Date:
Prev: Re: RES: Pmac Slits Davis, Mark via Tech-talk
Next: Re: RES: Pmac Slits giles.knap--- via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <2019
Navigate by Thread:
Prev: Re: phoebus evaluation Steven M. Hartman via Tech-talk
Next: RE: Should drvAsynIPPortConfigure print an error when device is not connected? Abdalla Ahmad via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <2019
ANJ, 15 May 2019 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·