1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: AW: Correct Settings for PIE816 Controller |
From: | "Peterson, Kevin M. via Tech-talk" <[email protected]> |
To: | "Rivers, Mark L." <[email protected]>, Torsten Bögershausen <[email protected]>, "Sintschuk, Michael" <[email protected]> |
Cc: | tech-talk <[email protected]> |
Date: | Thu, 19 Sep 2019 15:08:10 +0000 |
I created a github issue for this: https://github.com/epics-motor/motorPIGCS2/issues/3 I'm currently unable to email Steffen Rau for cybersecurity reasons that I don't understand. He has told me in the past that he isn't able to access github due to proxy issues. Given these communication difficulties, I would recommend using the old, non-PIGCS2 driver for now. Kevin On 9/19/19 6:46 AM, Mark Rivers wrote: > Hi Michael, > > I think that a derived class for the E-816 would need to be written. You could contact PI (Steffen Rau?) about that. It looks like the motorPIGCS2 module should support both GCS and GCS2 devices. Yours does not appear to be GCS2 because it does not list support for the CSV? command. > > Mark