Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020 
<== Date ==> <== Thread ==>

Subject: init a waveform
From: Alfio Rizzo via Tech-talk <tech-talk@aps.anl.gov>
To: "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Wed, 6 Nov 2019 15:26:11 +0000

Hi

I was wondering if there is a way to fill with some initial values a waveform record in a db file,

I.e. something like

 

record (waveform,mywave){

…..

field(VAL,”X Y Z”)

}

 

 

 

 

PhD Alfio Rizzo

Control System Integrator

Integrated Control Systems Division

European Spallation Source ERIC

 

Telephone: +46(0)721792342

Mail Address: P.O Box 176, SE 221 00 Lund, Sweden

Visiting address: Odarslövsvägen 113, Lund

 

https://europeanspallationsource.se/

 

essLogo

 


Replies:
Re: init a waveform Johnson, Andrew N. via Tech-talk

Navigate by Date:
Prev: Re: Waveform record not sending monitor on .NORD field Lucas Russo via Tech-talk
Next: Re: init a waveform Johnson, Andrew N. via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020 
Navigate by Thread:
Prev: Modbus Problems 黄佳伟 via Tech-talk
Next: Re: init a waveform Johnson, Andrew N. via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020 
ANJ, 06 Nov 2019 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·