Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 2025	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 2025
<== Date ==>		<== Thread ==>

Subject:	rmt CCExecInit problem
From:	Tasaddaq Khan via Tech-talk <[email protected]>
To:	[email protected]
Date:	Thu, 7 Nov 2019 15:08:47 +0500

I have added following line in my st.cmd

dbLoadRecords("db/test.db")

rmt

epicsThreadSleep 5

rmtConfig master.conf

epicsThreadSleep 2

CCExecInit

epicsThreadSleep 15

iocInit

epicsThreadSleep 5

rmtStart

epicsThreadSleep 10

I got the following error:

A call to 'assert(dbLockIsInitialized)' by thread 'cceTraverse' failed in

../dbLock.c line 245. EPICS Release EPICS R3.14.12.8

rmt:CCEXEC:GetStatus returned INVALID_ERROR --> PRR not in sync

Also when i comment out my dbLoadRecords("db/test.db"), then there is no error but database does not synchronize.

Please tell me how to solve this problem?

Tasaddaq

Navigate by Date:: Prev: RE: Streamdevice segmentation fault Hill, Bruce via Tech-talk; Next: Re: Waveform record not sending monitor on .NORD field Lucas Russo via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 2025
Navigate by Thread:: Prev: Re: init a waveform Johnson, Andrew N. via Tech-talk; Next: Re: rmt CCExecInit problem Michael Davidsaver via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 2025

ANJ, 07 Nov 2019