Yes,
ESS is using both TwinCAT 3 and EPICS.
In general, we are using a generic ADS-EPICS driver, which can be found
here:
<https://github.com/EuropeanSpallationSource/epics-twincat-ads>
For motion control with the NC-Blocks from Beckhoff (no robots)
we have a model 3 driver for the motorRecord:
<https://github.com/EuropeanSpallationSource/m-epics-ethercatmc>
It could be interesting to here some more details about your project,
as it may help to guide developers into the right (technical) direction.
I hope that helps
BR
/Torsten
On 28/02/20 16:11, Mercado, Ronaldo (DLSLtd, RAL, LSCI) via Tech-talk wrote:
Thanks for the reply and the diagram.
I don't have any experience using TwinCAT.
I believe ESS have created bindings to link EPICS to TwinCAT via ADS.
Best wishes,
Ronaldo
-----Original Message-----
From: Artur Piscalov <kom15 at standa.lt>
Sent: 28 February 2020 14:29
To: Mercado, Ronaldo (DLSLtd,RAL,LSCI) <ronaldo.mercado at diamond.ac.uk>
Cc: tech-talk at aps.anl.gov
Subject: RE: Beckhoff PLC support; Motion control
Dear Ronaldo,
Thank you for your email.
1) We are planning to integrate robotics system into our customer setup.
2) Whole equipment at customer sight is integrated trough EPICS.
3) Our robotic system requires EtherCAT based servo control/drive system.
4) Controller which is required for our robotics system can be integrated with beckhoff PLC and be a slave in the network.
5) As a part which will integrate our motion system and EPICS we are planning to use beckhoff PLC.
6) Questions: What beckhoff PLC at the moment is supported by EPICS?
7) Information presented in the installation guide says, that our motion controller can be as a slave in interface with twinCAT.
I look forward to hearing from you.
Yours sincerely
Artur
"Mercado, Ronaldo (DLSLtd,RAL,LSCI)"
<ronaldo.mercado at diamond.ac.uk> 2/28/2020 4:19 PM >>>
Could you share more information on your application to narrow your query down?
How is EPICS involved?
I gather your constraint is that you interface to a Beckhoff PLC.
Thanks,
Ronaldo
Diamond
-----Original Message-----
From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Artur Piscalov via Tech-talk
Sent: 28 February 2020 06:32
To: tech-talk at aps.anl.gov
Subject: Beckhoff PLC support; Motion control
Dear Sir/ Madam,
I am planning to integrate robotic system into the EPICS environment.
I am planning to use Beckhoff master (PLC) to control 3rd party motion controller.
Could you please inform me if there is any kind of relevant information available on particular topic?
I look forward to hearing from you.
Best regards,
Artur Piscalov
Product Manager
STANDA
E-mail: kom15 at standa.lt
Phone: +370-5-2651474
Fax:+370-5-2651483
http://www.standa.lt
http://www.standaphotonics.com
https://www.facebook.com/Standa.ltd?fref=ts
https://twitter.com/standa_ltd
https://www.youtube.com/user/StandaLTD
https://www.linkedin.com/company/standa/
See our products at:
DESY Users' Meeting 2020 (
http://photon-science.desy.de/users_area/users%27_meeting/index_eng.html
)
January 30 - 31
Hamburg
SPIE Photonics West 2020, San Francisco, Feb 4 - 6, booth #748 Фотоника 2020, Moscow, Mar 31 - Apr 3, booth #FB070
--
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
- References:
- RE: Beckhoff PLC support; Motion control Artur Piscalov via Tech-talk
- RE: Beckhoff PLC support; Motion control Mercado, Ronaldo (DLSLtd, RAL, LSCI) via Tech-talk
- Navigate by Date:
- Prev:
RE: Beckhoff PLC support; Motion control Freddie Akeroyd - UKRI STFC via Tech-talk
- Next:
Support for Varian ion pump controllers Mark Rivers via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
- Navigate by Thread:
- Next:
RE: Ethernet question Mark Rivers via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
|