Experimental Physics and
Industrial Control System

Ernesto Paiser via Tech-talk <tech-talk at aps.anl.gov> · Mon, 29 Jun 2020 00:10:30 +0000

Hello,

My subroutine record (3.15.5) is not finding the INAM and the SNAM subroutines:

iocInit()
Starting iocInit
############################################################################
## EPICS R3.15.5-01
## EPICS Base built Feb 21 2020
############################################################################
Subroutine not found PV: T:Q03:CndtnSB Init subroutine (INAM)

The code was working in 3.14.11 (lised below):

static long conditionInit(subRecord *psub)
{
  struct myCallbackStruct *pcb;

  ...
  pcb->precord = psub;
  psub->dpvt = (void *)pcb;
  return(0);
}

static long conditionProc(subRecord *psub)
{
  struct myCallbackStruct *pcb;
  long nRequest = 1;

  ...
  return(0);
}

static registryFunctionRef conditionRef[] = {
    {"conditionInit",(REGISTRYFUNCTION)conditionInit},
    {"conditionProc",(REGISTRYFUNCTION)conditionProc}
};

static void condition(void)
{
    registryFunctionRefAdd(conditionRef,NELEMENTS(conditionRef));
}
epicsExportRegistrar(condition);

In the Makefile I have included the source code like below:

# <name>_registerRecordDeviceDriver.cpp will be created from <name>.dbd
$(PROD_IOC)_SRCS += $(PROD_IOC)_registerRecordDeviceDriver.cpp
$(PROD_IOC)_SRCS_DEFAULT += iocshMain.c
$(PROD_IOC)_SRCS += condition.c

What I'm missing, is there some changes from 3.14.11 to 3.15.5.

Thank you,

Ernesto

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System