On 6/30/20 12:47 PM, Pierrick M Hanlet via Tech-talk wrote:
> Hi all,
> I'm building an IOC for a SoC Cyclone V Altera processor, using base 7.0.3.1. When starting my IOC, during
> initialization, I get:
> Error initializing pva link handling : Failed to initialize UDP transport.
> On line 805 of ../../src/remote/blockingUDPTransport.cpp
> /rfs/usr/local/epics/base/lib/linux-arm/libpvAccess.so(_ZN5epics6pvData6detail14ExceptionMixedINS0_13BaseExce<<TRUNCATED>>
> Thread _main_ (0x27268) can't proceed, suspending.
>
> I'm assuming that I don't have my arm toolchain configuration correct. Any suggestions as to how we
> might be able to track this down?
> Thank you,
> Pierrick
This is likely to be network config, or maybe kernel config. Apply
https://github.com/epics-base/pvAccessCPP/commit/3f050f35333999513bc545a6e6cb9eaca4ea5317
to get a more useful error message.
- References:
- linux-arm: fail to initialize UDP transport Pierrick M Hanlet via Tech-talk
- Navigate by Date:
- Prev:
linux-arm: fail to initialize UDP transport Pierrick M Hanlet via Tech-talk
- Next:
[PV Access] Decimation Channel filter equivalent for PV Access? Juan F. Esteban Müller via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
linux-arm: fail to initialize UDP transport Pierrick M Hanlet via Tech-talk
- Next:
[PV Access] Decimation Channel filter equivalent for PV Access? Juan F. Esteban Müller via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
|