Re: GPIB remote control

[Eric Norum via Tech-talk <tech-talk@aps.anl.gov>]

Sorry for the confusing reply — I meant the driver for the Prologix LAN/GPIB adapter you mentioned: http://prologix.biz/gpib-ethernet-controller.html

And in response to Michael Davidsaver’s question, yes, the driver does use the ‘++’ commands to communicate with the Prologix adpater.

On Nov 5, 2020, at 12:47 PM, Mark Rivers via Tech-talk <tech-talk@aps.anl.gov> wrote:

Hi Eric,

 

Thanks for the reply.

 

Ø  I wrote the ASYN driver for the Prologix device you mentioned.  It seemed to work with the few devices I tried.

 

You mean the standard asyn VXI-11 driver, right?

On Nov 5, 2020, at 11:42 AM, Michael Davidsaver <mdavidsaver@gmail.com> wrote:

Does your driver handle their non-standard ++ command escaping?