Re: .RE: Configuring serial communication with Lakeshore 331 via Moxa (Mark Rivers)

["Bradnick, Ben \(DLSLtd, RAL, LSCI\) via Tech-talk" <tech-talk at aps.anl.gov>]

Hi Kevin, Kurt,

I have uploaded it here: https://github.com/dls-controls/terminalServer

There is an example IOC for a Moxa terminal server. The module was initially written a long time ago by a past employee but is still used a lot at our facility. Let me know if you have any problems.

Kind regards,

Ben

---

From: Tech-talk <tech-talk-bounces at aps.anl.gov> on behalf of Goetze, Kurt via Tech-talk <tech-talk at aps.anl.gov>
Sent: 03 February 2022 17:31
To: Tech-talk <tech-talk at aps.anl.gov>
Subject: RE: .RE: Configuring serial communication with Lakeshore 331 via Moxa (Mark Rivers)

 

I agree with Kevin, we would be interested in this.  Thanks for sharing it Ben.

Kurt

-----Original Message-----
From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Kevin Peterson via Tech-talk
Sent: Thursday, February 3, 2022 11:10 AM
To: Bradnick, Ben (DLSLtd,RAL,LSCI) <ben.bradnick at diamond.ac.uk>; tech-talk at aps.anl.gov; mark.koennecke <mark.koennecke at psi.ch>; Rivers, Mark L. <rivers at cars.uchicago.edu>
Subject: Re: .RE: Configuring serial communication with Lakeshore 331 via Moxa (Mark Rivers)

Ben,

I am interested in that EPICS module.

Kevin

On 2/3/22 08:46, Bradnick, Ben (DLSLtd, RAL, LSCI) via Tech-talk wrote:
> Hi,
>
> We have an EPICS support module that allows us to view and configure
> the mentioned port parameters of our Moxa and older ACS terminal
> servers using SNMP and uses autosave to store/restore the configuration.
>
> I could upload it if there's any interest.
>
> Kind regards,
> Ben

 

-- 

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom