In case some is looking for the same or similar driver:
I wrote some simple asyn-driver that works for our stage mentioned in my first post. Here is the github-link:
https://github.com/MichaS-git/Microtest
Note the description! It only works with the vendor software.
Michael
Von: Sintschuk, Michael
Gesendet: Mittwoch, 21. Juli 2021 16:41
An: tech-talk at aps.anl.gov
Betreff: EPICS Support for Deben CT5000 5kN in-situ loadcell tensile stage
Hello EPICS-community,
does anyone know of existing EPICS-support for the CT5000 5kN in-situ loadcell tensile stage (or similar) from Deben?
At the manufacturer page
https://deben.co.uk/tensile-testing/%C2%B5xct/tensile-stages-for-x-ray-ct-tomography/
it is said: … MICROTEST drive electronics … via USB.
Maybe someone has existing EPICS-templates for communication with those?
Best regards
Michael
Michael Sintschuk
Bundesanstalt für Materialforschung und –prüfung (BAM)
8.5 Mikro-ZfP
Unter den Eichen 87
12205 Berlin
GERMANY
P: +49 30 8062-15063 (BESSY, Adlershof)
P: +49 30 8104-4065 (BAM, Steglitz)
michael.sintschuk at bam.de