Hi Michael,
I once wrote a driver for the PS90 to control some non OWIS motors in a slit
system. I don't know whether the code still works for the PS90+ that you
mention. If you are interested in the code as a starting point, I can send it
to you.
Regards,
Jörn
Am Donnerstag, 7. Juli 2022, 11:50:46 CEST schrieb Sintschuk, Michael via
Tech-talk:
> Hi all,
>
> does anyone have EPICS-Support for position control units from Owis?
> https://www.owis.eu/en/products/Positionier-Steuerungen~338
>
> Like the PS 10-32, PS 30, PS 35 or PS 90+ ?
>
> Regards
> Michael
>
> Michael Sintschuk
> Bundesanstalt für Materialforschung und -prüfung (BAM)
> 8.5 Mikro-ZfP
>
> Unter den Eichen 87
> 12205 Berlin
> GERMANY
>
> P: +49 30 8062-15063 (BESSY, Adlershof)
> P: +49 30 8104-4065 (BAM, Steglitz)
> michael.sintschuk at bam.de<mailto:michael.sintschuk at bam.de>
> michael.sintschuk at helmholtz-berlin.de<mailto:michael.sintschuk@helmholtz-ber
> lin.de>
- References:
- EPICS-Support for Owis motor stages Sintschuk, Michael via Tech-talk
- Navigate by Date:
- Prev:
AW: EPICS Support for Deben CT5000 5kN in-situ loadcell tensile stage Sintschuk, Michael via Tech-talk
- Next:
Re: Set/get enum value of mbbo from within AD driver Mark Rivers via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
<2022>
2023
2024
- Navigate by Thread:
- Prev:
EPICS-Support for Owis motor stages Sintschuk, Michael via Tech-talk
- Next:
AW: EPICS Support for Deben CT5000 5kN in-situ loadcell tensile stage Sintschuk, Michael via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
<2022>
2023
2024
|