Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024
<== Date ==>		<== Thread ==>

Subject:	no bin file
From:	lynn via Tech-talk <tech-talk at aps.anl.gov>
To:	tech-talk <tech-talk at aps.anl.gov>
Date:	Mon, 22 May 2023 23:14:17 +0800 (CST)

Hi all,

Recently, i try to modify the dirver of motorAcs.

All environment about epics,motor,asyn was good and run well.

I downloaded motorAcs file from https://github.com/epics-motor/motorAcs.

Then i modified the motorAcs file as i need.

Now, there is not bin file after i make it.

Could someone tell me how to make the bin file came out? Because i just know type: ../../bin/ st.cmd to start it.

Regards,

Lynn

	lynn
邮箱：lynn0703 at yeah.net

Navigate by Date:: Prev: Re: makefile compilation question NICOLE Remi via Tech-talk; Next: Re: makefile compilation question timesir via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024
Navigate by Thread:: Prev: Re: makefile compilation question timesir via Tech-talk; Next: RE: no bin file Mark Rivers via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024

ANJ, 23 May 2023