EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  <20232024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  <20232024 
<== Date ==> <== Thread ==>

Subject: Re: Simulated limit switches on motorSim motor
From: "Nariyoshi, Pedro via Tech-talk" <tech-talk at aps.anl.gov>
To: Kevin Peterson <kmpeters at anl.gov>, "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>
Date: Tue, 28 Nov 2023 15:36:21 +0000

Hi Kevin,


I figured I could try to remove the SPC_NOMOD from the dbd (and a bo/calcout record to write to it), but it feels too hackish. What I was really trying to figure out is if there was a field I could put a link in to set the limit switch fields (similar to RDBL/DINP/etc). 


Pedro Nariyoshi

Software Controls Engineer

Facility for Rare Isotope Beams

Michigan State University

640 South Shaw Lane

East Lansing, MI 48824, USA

Tel. 517-908-7352

Email: nariyosh at frib.msu.edu

1633986722804



From: Kevin Peterson <kmpeters at anl.gov>
Sent: Tuesday, November 28, 2023 10:18:13 AM
To: Nariyoshi, Pedro; tech-talk at aps.anl.gov
Subject: Re: Simulated limit switches on motorSim motor
 
[EXTERNAL] This email originated from outside of FRIB
Pedro,

The HLS/LLS/RHLS/RLLS fields are read-only.

Kevin

On 11/21/23 12:24, Nariyoshi, Pedro via Tech-talk wrote:
> Hi,
>
>
> I am working on creating virtual motors to control some slits. One
> problem I have is that I couldn't find a way to set the
> HLS/LLS/RHLS/RLLS fields. Is there a way to control these (whether
> having an input link to these values or a writing them directly with a
> calcout or bo record)?
>
>
> Thank you very much
>
>
> *Pedro Nariyoshi*
>
> Software Controls Engineer
>
> Facility for Rare Isotope Beams
>
> Michigan State University
>
> 640 South Shaw Lane
>
> East Lansing, MI 48824, USA
>
> Tel. 517-908-7352
>
> Email: nariyosh at frib.msu.edu <mailto:nariyosh at frib.msu.edu>
>
>       
>
> 1633986722804
>
>

JPEG image

JPEG image

JPEG image

JPEG image

JPEG image

JPEG image

JPEG image

JPEG image

JPEG image

JPEG image

JPEG image

JPEG image

JPEG image


Replies:
Re: Simulated limit switches on motorSim motor Torsten Bögershausen via Tech-talk
Re: Simulated limit switches on motorSim motor Kevin Peterson via Tech-talk
References:
Simulated limit switches on motorSim motor Nariyoshi, Pedro via Tech-talk
Re: Simulated limit switches on motorSim motor Kevin Peterson via Tech-talk

Navigate by Date:
Prev: Re: Simulated limit switches on motorSim motor Kevin Peterson via Tech-talk
Next: Re: Simulated limit switches on motorSim motor Torsten Bögershausen via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  <20232024 
Navigate by Thread:
Prev: Re: Simulated limit switches on motorSim motor Kevin Peterson via Tech-talk
Next: Re: Simulated limit switches on motorSim motor Torsten Bögershausen via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  <20232024 
ANJ, 28 Nov 2023 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·