Experimental Physics and
Industrial Control System

-- 
+-------------------------------------------------+
| Rolf Keitel, TRIUMF         Tel: (604) 222-7453 |
| Group Leader ISAC Controls  Fax: (604) 222-7307 |
| and Electronics Development                     |
| Vancouver, B.C., Canada                         |
+-------------------------------------------------+

--- Begin Message ---

Subject:	Re: vxWorks, other ops
From:	"Bob Dalesio" <[email protected]>
To:	Rolf Keitel <[email protected]>
Date:	Sun, 12 Aug 2001 08:35:01 -0600

Hi ROlf,
We have been using the Intel vxWorks version. I do not know
the details of how it was set up. I do know that one issue
was that drivers had to deal with the fact that there is
only one interrupt vector. So the drivers using interrupts
had to be put on a linked list and the argument had to
indicate which was to be awoken.
I don't know the other details. I think that Jeff may be the
one that knows them however.

LINUX is another matter. If you are looking for something
that must run and is time critical, I would not go down this
path yet. If you are looking at something that has relaxed
time responses, it may be worthwhile.

Take Care,
Bob

--- End Message ---

Navigate by Date:

Prev: [Fwd: vxWorks, other ops] Rolf Keitel

Next: [Fwd: vxWorks, other ops] Rolf Keitel

Index: 1994  1995  1996  1997  1998  1999  2000  <2001>  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: [Fwd: vxWorks, other ops] Rolf Keitel

Next: [Fwd: vxWorks, other ops] Rolf Keitel

Index: 1994  1995  1996  1997  1998  1999  2000  <2001>  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024