"J. Frederick Bartlett ([email protected])" wrote:
>
> I have encountered a peculiar problem. The EPICS "scanppl" command
> (function) can only be executed once and generate output. The second
> and succeeding executions produce no output. This is true both for the
> console port and for telnet connections.
>
> Now it gets interesting. If the telnet connection is terminated and
> then reestablished, the "scanppl" command works again (both for the
> telnet and console port connection) but still only once. Also, we see
> this only for our PPC platforms (MVME2301 and MVME2304); the MVME162
> processors allow multiple executions of "scanppl".
>
> We are currently using version R3.13.4 of EPICS. Anyone have an
> explanation?
>
We are running 3.13.4 on PPC's and mv167's and don't see this
problem. We can execute scanppl as many times as we like
Regards
Chris Mayer
Observatory Sciences Ltd. Email: [email protected]
William James House Tel: 44 - (0)1223 - 508257
Cowley Road, Fax: 44 - (0)1223 - 508258
Cambridge, CB4 0WX, UK http://www.observatorysciences.co.uk
- References:
- The "scanppl" command only works once J. Frederick Bartlett ([email protected])
- Navigate by Date:
- Prev:
Re: et_wish help requested Andy Foster
- Next:
Re: VxWorks on Linux Ralph . Lange
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
The "scanppl" command only works once J. Frederick Bartlett ([email protected])
- Next:
RE: The "scanppl" command only works once Kevin Tsubota
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|