Re: EDM Related Displays

[Emmanuel Mayssat <emmanuel_mayssat@lynceantech.com>]

I use medm, so not sure about the capabilities of edm.
If I wanted to do what you want with medm, 
I probably would look at a window matching utility, such as Sawfish's
"Matched Windows" or devilspie.

--
Emmanuel Mayssat
Lyncean Technologies, Inc.



On Fri, 2007-03-02 at 12:51 -0800, Robert Emery wrote:
> I am using edm to set up operator displays. There are instances where I
> would like to open an edm display using a related display button and at
> the same time have another edm display (not the one with the related
> display button in it) close.
> 
> For example, I have a main menu display along the left of the screen and
> a beamline display along the bottom. I would use related display
> buttons in the main menu display to call up different beamline
> displays. If a new beamline related display was selected from the main
> menu, I would like it to open and I would like the existing beamline
> display (that had previously been opened from the main menu) to close.
> 
> Any ideas?
> 
> Thanks
> 
> Robert Emery
> UW Medical Center
>