Hi Jihwa,
> Dose any one has experience of mrfioc2 evr driver for uTCA platform?
> PMC-EVR-230 firmware version: PMC-EVR-230-11000007.bit
I guess you are not using the native uTCA card but a PMC EVR on a PMC
carrier card, right?
> mrmEvrSetupPCI("PMCEVR",0xe,1,0)
> Device PMCEVR 14:1.0
> Using IRQ 16
> Failed to open uio device for PCI device 0000:0e:01.0: No such file or
> directory
> Failed to enable interrupt
What does "lspci" say? Maybe you've plugged the card into a different
AMC slot?
-Martin
--
Martin Konrad
Control System Engineer
Facility for Rare Isotope Beams
Michigan State University
640 South Shaw Lane
East Lansing, MI 48824-1321, USA
Tel. 517-908-7253
Email: [email protected]
- Replies:
- RE: mrfioc2 error at uTCA platform 김지화(빔라인장치팀)
- Navigate by Date:
- Prev:
mrfioc2 error at uTCA platform 김지화(빔라인장치팀)
- Next:
RE: EpicsQt compile problems Andrew Rhyder
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
mrfioc2 error at uTCA platform 김지화(빔라인장치팀)
- Next:
RE: mrfioc2 error at uTCA platform 김지화(빔라인장치팀)
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
|