RE: mrfioc2 error at uTCA platform

[김지화(빔라인장치팀) <jihkim@postech.ac.kr>]

Hi Martin,

>> PMC EVR on a PMC carrier card, right?
Yes, right! Vadatech PMC Carier board.

 
>>What does "lspci" say? Maybe you've plugged the card into a different AMC slot?
I think slot is correct slot number because it worked before.

 Here is a PMC-EVR-230 with VID:DID 10b5:9030 and subvendor ID 1a3e
and subvendor device ID 11e6. (JUkka already confirmed )

[root@amc725 mrf_pci_driver]# lspci -nn -x

0e:01.0 Signal processing controller [1180]: PLX Technology, Inc. PCI9030 32-bit 33MHz PCI <-> IOBus Bridge [10b5:9030] (rev 01)

00: b5 10 30 90 02 00 90 02 01 00 80 11 08 00 00 00

10: 00 00 a1 fd 00 00 00 00 00 00 a0 fd 00 00 00 00

20: 00 00 00 00 00 00 00 00 00 00 00 00 3e 1a e6 11

30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 00 00

 

Interesting is the SLAC evr version is correctly working.

evrIocTest_registerRecordDeviceDriver(pdbbase)

ErConfigure(0, 0, 0, 0, 1)

EvrOpen, device = /dev/era3

EVR Found with Firmware Revision 0x11000007

Found a PMC_EVR /dev/era3

 
Jihwa

________________________________________
보낸 사람: Konrad, Martin <konrad@frib.msu.edu>
보낸 날짜: 2016년 3월 7일 월요일 오후 1:37
받는 사람: 김지화(빔라인장치팀); tech-talk@aps.anl.gov
제목: Re: mrfioc2 error at uTCA platform

Hi Jihwa,
 > Dose any one has experience of mrfioc2 evr driver for uTCA platform?
> PMC-EVR-230 firmware version: PMC-EVR-230-11000007.bit
I guess you are not using the native uTCA card but a PMC EVR on a PMC
carrier card, right?

> mrmEvrSetupPCI("PMCEVR",0xe,1,0)
> Device PMCEVR 14:1.0
> Using IRQ 16
> Failed to open uio device for PCI device 0000:0e:01.0: No such file or
> directory
> Failed to enable interrupt
What does "lspci" say? Maybe you've plugged the card into a different
AMC slot?

-Martin

--
Martin Konrad
Control System Engineer
Facility for Rare Isotope Beams
Michigan State University
640 South Shaw Lane
East Lansing, MI 48824-1321, USA
Tel. 517-908-7253
Email: konrad@frib.msu.edu