Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	wait/dealy inside a record
From:	Stefen Paul <[email protected]>
To:	EPICS Tech Talk <[email protected]>
Date:	Fri, 12 Aug 2016 13:18:46 +0530

Hi all,

I'm using a waveform record (with custom device support) for writing & reading a hardware.

I need following sequence:

- write to a register

- wait for 20 microseconds

- again write to the same register

- again wait for 20 microseconds

- read an array of other registers

Any tips on how can I generate a delay/wait of ~20 microsec inside the device support routine or otherwise in EPICS ?

Thanks,

Stefen

Replies:: Re: wait/dealy inside a record Michael Davidsaver; Re: wait/dealy inside a record Andrew Johnson

Navigate by Date:: Prev: Query palak shimpee; Next: Re: wait/dealy inside a record Michael Davidsaver; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: RE: Streamdevice for Hexa command Mark Rivers; Next: Re: wait/dealy inside a record Michael Davidsaver; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 12 Aug 2016