Hello,
currently I have a very strange problem in a code I'm developing to read out
cameras from ZWO. I ran into a severe problem in the image readout handler.
When calling doCallbackGenericPointer() the IOC creates every time a couple of
new threads and consumes lot of CPU power ( 300% on a quad core). So after a
very short time the system becomes unresponsive and has to be switched off.
The image is 3520*4656 bytes in size and is in monochrome mode, so UInt8 as
data type.
In a GUI (CS-Studio) that is displaying the image data as Intensity graph I
observe a "disconnect" state for every cycle of the image, once the NDStdArray
has been enabled. In between it shows "No data".
Has anybody seen such behavior before? Any ideas welcome how to search for the
reason of this.
Regards,
Jörn Dreyer
- Replies:
- Re: Strange problem with areaDetector driver Mark Rivers via Tech-talk
- Navigate by Date:
- Prev:
RE: SoftIOC and Labview Kathryn Baker - UKRI STFC via Tech-talk
- Next:
Re: Strange problem with areaDetector driver Mark Rivers via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: SoftIOC and Labview Baily, Scott A via Tech-talk
- Next:
Re: Strange problem with areaDetector driver Mark Rivers via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
|