Re:Re:Re: RE: A question on asyn application

[cxy via Tech-talk <tech-talk at aps.anl.gov>]

Hello everyone,

Thank you for all your advice.

I made a mistake here because I am not clear with the usage of every parameter in the asynPortDriver function.

It should be like this:

Now it works.

Best wishes,

Yoon

At 2024-01-23 13:26:35, "cxy" <ycx810212 at 163.com> wrote:

Hello Ralph,

       Thank you for your advice.

       I have tried months ago that this device can run correctly with StreamDevice. 

       But now  we need to use asyn to write it again.

Best wishes

Yoon

At 2024-01-23 12:57:49, "Ralph Lange" <ralph.lange at gmx.de> wrote:

Hi Yoon,

Just to make sure:

If your device is interfaced through messages over a byte-stream connection (like TCP) and the communication follows a request/response model - your test looks like exactly that - you should not code your own asyn driver, but use StreamDevice.

https://paulscherrerinstitute.github.io/StreamDevice/

Cheers,

~Ralph