Hello everybody,
we have recently moved to VxWorks version 5.3.1 (Tornado 1.0.1)
and we have unfortunately realized that our GPIB application
(based on the NI-1014 VME interface + John Winans driver) does
not work anymore. We see initialization errors when the GPIB driver
is loaded.
We have re-built the kernel several times including/excluding facilities
such that we approach the 5.3 configuration but we have not succeded.
We have also re-built EPICS and our aplication several times but
without any progress.
Is anybody using this GPIB driver with VxWorks 5.3.1 and
EPICS R3.13.0.beta11? If not, can anybody give a hint on what
can be the problem?
Many thanks for any help or idea,
Josep Perlas
--
_____________________________________________________
Dr. Josep A. Perlas - Control System and Power Technology
Lab. Llum Sincrotro - IFAE ------------ Tel: (+34 3)581.28.38
Edifici Cn, Campus UAB ------------ Fax: (+34 3)581.19.38
E-08193 Bellaterra (Barcelona) SPAIN ---- email: [email protected]
_____________________________________________________
- Navigate by Date:
- Prev:
Re: first serial devSupp. Maren Purves
- Next:
Re: GPIB+VxWorks3.5.1 problem Bill Brown
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: first serial devSupp: drvIpac Peregrine M. McGehee
- Next:
Re: GPIB+VxWorks3.5.1 problem Bill Brown
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|