There are some vacuum devices using RS232 and RS485 interface in our project.
So we select a solution consisting of MVME2302, VIPC616, and GSOctal IP module. We also download the Ipac2.2 package.
But we failed set up this device driver from within a vxWorks startup script. The information is as follows:
tyGSOctalDrv 4
allocating 4 structures of 2056 bytes
value = 0 = 0x0
ipacAddCarrier &vipc616,"0x6000"
value = 0 = 0x0
MODO = tyGSOctalModuleInit("GSIP_OCTAL232",0x80,0,0)
0x1bef5d0 (tShell): tyGSOctalModuleInit: No memory allocated for carrier new symbol "0 slot MODO0" added to symbol table.
MODO = 0x1bd5ef8: value = -1 = 0xffffffff = tyGSOctalModules + 0xfe4104cf
PORT00 = tyGSOctalDevCreate("/tyGS/0/0",MODO,0,512,512)
new symbol "PORT00" added to symbol table.
PORT00 = 0x1bd5eb0: value = -1 = 0xffffffff = tyGSOctalModules + 0xfe4104cf
It looks like that "tyGSOctalModuleInit" routine return with ERROR.
How can I do?
TIA
Yongbin Leng
[email protected]
- Replies:
- Re: Problems with GSOctalRS232 Andrew Johnson
- Navigate by Date:
- Prev:
longoutRecord Bug Eric Bjorklund
- Next:
Re: longoutRecord Bug Andy Foster
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: longoutRecord Bug Marty Kraimer
- Next:
Re: Problems with GSOctalRS232 Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|