EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: GreenSpring TIP810 CANbus system
From: "Allison, Stephanie" <[email protected]>
To: [email protected], tech-talk <[email protected]>
Date: Mon, 19 Jul 2004 10:59:17 -0700
Hello,

And at SPEAR, we are using the Acromag AVME9670 IP carrier with the TIP810 module to monitor/control our Wiener VME64x crates.  We use Andrew's TIP810 driver code and Andy Foster's XY9660 IP carrier driver (with a small mod to support clearing, enabling, disabling interrupts on receipt of ipac_irq commands).   Both were upgraded to run on RTEMS.

Stephanie Allison


Navigate by Date:
Prev: Re: CA Gateway Kenneth Evans, Jr.
Next: Proglem doing CA calls after catching a signal Robert Soliday
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: GreenSpring TIP810 CANbus system Matthias Clausen
Next: RTEMSfor MVME5500 Kiman Ha
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·