Experimental Physics and
Industrial Control System

John Sinclair <[email protected]> · Thu, 23 Aug 2007 16:31:19 -0400

All,
I'm trying to use async device support for a TDS3012B scope. I have not
yet configured

any device specific commands, I'm just executing vxi11Configure.
I have no idea what value vxiName should take.
For the asynSetTraceMask function, I have no idea what addr should be. I
never set anything that looks like an address.
EPICS version is 3.14.9
Asyn version is 4.8
Host is Redhat Enterprise 4
When I talk to the scope from a web page, everything is well and I can
send it

commands properly.
Executing st.cmd gives
Starting iocInit

############################################################################

## EPICS R3.14.9 $R3-14-9$ $2007/02/05 16:31:45$

## EPICS Base built Aug 20 2007

############################################################################

iocInit: All initialization complete

vxi11Configure("L0","192.168.1.101",0,0.0,"inst0",0,0)

asynSetTraceMask("L0",-1,0x1f)

2007/08/23 14:19:05.484 L0 -1 exception 3 occurred calling exceptionUser

2007/08/23 14:19:05.486 asynManager connect queueCallback port:L0

2007/08/23 14:19:05.486 L0 addr -1 vxiConnect

2007/08/23 14:19:05.486 L0 vxiConnectPort

2007/08/23 14:19:05.494 inst0 vxiCreateDeviceLink RPC error : RPC:
Unable to receive; errno = Connection reset by peer
2007/08/23 14:19:05.494 asynManager::asynConnectCallback, port L0 error
calling asynCommon->connect

2007/08/23 14:19:05.495 asynManager connect queueCallback port:L0

2007/08/23 14:19:05.495 L0 addr -1 vxiConnect

2007/08/23 14:19:05.496 L0 vxiConnectPort

2007/08/23 14:19:05.502 inst0 vxiCreateDeviceLink RPC error : RPC:
Unable to receive; errno = Connection reset by peer
2007/08/23 14:19:05.503 asynManager::asynConnectCallback, port L0 error
calling asynCommon->connect

2007/08/23 14:19:05.504 asynManager connect queueCallback port:L0

2007/08/23 14:19:05.504 L0 addr -1 vxiConnect

2007/08/23 14:19:05.504 L0 vxiConnectPort

2007/08/23 14:19:05.511 inst0 vxiCreateDeviceLink RPC error : RPC:
Unable to receive; errno = Connection reset by peer
2007/08/23 14:19:05.512 asynManager::asynConnectCallback, port L0 error
calling asynCommon->connect

2007/08/23 14:19:05.512 L0 addr -1 queueRequest priority 3 not lockHolder

2007/08/23 14:19:05.513 L0 -1 autoConnect

2007/08/23 14:19:05.513 L0 addr -1 vxiConnect

2007/08/23 14:19:05.513 L0 vxiConnectPort

2007/08/23 14:19:05.520 inst0 vxiCreateDeviceLink RPC error : RPC:
Unable to receive; errno = Connection reset by peer
2007/08/23 14:19:05.520 L0 -1 autoConnect could not connect

2007/08/23 14:19:05.521 asynManager connect queueCallback port:L0

2007/08/23 14:19:05.521 L0 addr -1 vxiConnect

2007/08/23 14:19:05.522 L0 vxiConnectPort

2007/08/23 14:19:05.528 inst0 vxiCreateDeviceLink RPC error : RPC:
Unable to receive; errno = Connection reset by peer
2007/08/23 14:19:05.529 asynManager::asynConnectCallback, port L0 error
calling asynCommon->connect
-------------------------------
Any ideas?
John Sinclair

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System